Santa Tree Skirt--post 3

Ready for basting 

Over the years that I've made this pattern, the useable width of the fabric has decreased. I found that I adding a 4 inch strip to the backing made it much easier to layer this project. I used long pins to pin the layers together. 

Stiched around the edge and pin basted

Then I hand basted the sticking area. I added this time consuming step because doing it will decrease my chances of stitching in a tuck. A tuck would mean having to rip and restitch an area. 

I trimmed the excess batting and backing. I carefully stitched around the edges leaving an edge open for turning. Hand basting was worth the effort because I had no tucks! 

It was a beast to turn inside out; but, I did it without as much angst as I had anticipated. 

I pressed the turned edges and topstitched them to hold the layers in place. Then I pinned basted the layers to ready the project for machine quilting.

I stitched in the ditch with monofilament thread. In the first stitching session, I completed the ditch stitching and more than half of quilting the six belts.

Belt and Santa suit quilting

In my second stitching session the following day, I finished the belts and stitched half of the Santa suits before my body cried, "ENOUGH!"

Detail of suit and boot quilting

In my third session, I finished the Santa suits and started on the boots and dark fabric on the arms. I finished two before my body needed to stop.

Continuous curves stitched in the green part of the arms

In my fourth session, I finished the boots and the arms. I used a curved ruler to stitch a continuous curve in the green section of the arms. 

Defining the eyes

I stitched the outline of the eyes to provide a little more definition. I added a straight stitch around the mustache.

Paisley motif quilted in the beards

Using a paisley free motion motif, I stitched five of the beards. My body was super tired after that session!

Loop motif quilted in the background

The following day, I stitched the last beard and started quilting the background. I used micro quilter thread by Superior to quilt the background. I used Aurifil 50 weight cotton threads to quilt the Santas. I needed two more sessions to finish the quilting. 

Thread used in the project

I added the label, sashing it with the last of a Christmas fabric I purchased early in my quilting journey. I finished the tree skirt! Finishing this project was goal number three on my June list. I used seven yards of fabric; but, I've purchased some more wide backing so my net stash numbers are not increasing as much as I had hoped! 

Label

Fabric Summary:

Fabric in this month: 12 yards  (I bought two three yard wide back bundles.)  

Fabric in year to date: 38 yards

Fabric used from stash this month:  7 yards 

Fabric used from stash year to date: 55 yards

Net loss/gain this month: 5 yards

Net loss/gain year to date: -17 yards 

Ring of Santa's finished

This is a gift for my niece whose wedding is in July.